Loading...

Pleated Cellular Shade Parts

Replacement For Pleated And Cellular Shades

#V013A (1) Cord Holder
$1.99
Cord holder, 2" tall

#V013B Cord Holder
$9.99
Devise comes with wall and side mount brackets. 1 1/8" wide 3" tall

ANP09- 3/4" Pleat Cord Lock Left

CODE: 66

$9.99
3/4" Pleat Cord Lock Left

ANP10- 3/4" Pleat Cord Lock Right

CODE: 67

$9.99
3/4" Pleat Cord Lock Right

ANP11- 3/8" Pleat Left Cord Lock

CODE: 68

$9.99
3/8" Pleat Left Cord Lock

ANP12- 3/8" Pleat Cord Lock Right Side

CODE: 69

$9.99
Cord Lock Right Side

Part NP02- C Clamp For Cord Loop System

CODE: 60

$1.99
Used with cord loop systems

Part NP03A White Cord Condenser

CODE: 311

$2.99
White cord condenser 1" tall. Holds up to 6 cords 0.9mm. And 1 cord up to 1.8mm cord at the bottom. Comes with 1 plastic washer.

Part NP03B Off White Brake Away Cord Connector
$2.99
Safety cord condenser 1 3/4" tall. Holds up to 3 cords from 0.9mm to 1.4mm and 1 pull cord at the bottom. Comes with 3 plastic washers.

Part NP03C Clear Plastic Condenser
$2.99
5/8" tall, holds up to 5 cords of 0.9mm. And 1 pull cord at the bottom up to 1.8mm cord.

Part NP03D Plastic Washer Outside Diameter 1/4"
$0.25
Plastic washer 1/4" diameter.

Part NP03E-Clear Plastic Stopball

CODE: 64

$0.99
This will connect pull cord to pleated shade cord. Up to 5 cords at 0.9mm and 1 pull cord up to 1.8mm.

Part NP03F-Milky White StopBall

CODE: 398

$0.75
This will connect pull cord to pleated shade cord. Up to 7 cords at 0.9mm and 1 pull cord up to 1.8mm. Milky white stop ball 1/2" wide..

Part NP03G-Cellular Pleated Shade Metal Cord Condensor

CODE: 80

$3.99
Metal Cord Condensor. This will connect pull cord to pleated shade cord. Up to 5 cords at 0.9mm and 1 pull cord up to 1.8mm

Part NP03H- Cord Tassel Clear Plastic

CODE: 110

$0.79
Cord Tassel 3/4" height.

Part NP06- Right Side Small Cellular Cord Lock, Use 1.0mm Cord

CODE: 63

$14.99
Cord lock fits on a 1 7/16" headrail, uses 1.0mm pleated shade cord.

Part NP06A- Left Side Small Cellular Cord Lock, Use 1.0mm Cord

CODE: 240

$14.99
Cord lock fits on a 1 7/16" headrail, uses 1.0mm pleated shade cord.

Part NP06B- Off White Cover For Small Lock
$6.99
Cover For Small Lock

Part NP06C-Right Side Large Cord Lock, Uses 1.0mm Cord
$14.99
Cord lock fits 1 7/8" headrail, uses 1.0mm pleated shade cord.

Part NP06D-Left Side Side Large Cord Lock, Uses 1.0mm Cord
$14.99
Cord lock fits 1 7/8" headrail, uses 1.0mm pleated shade cord.

Part NP06E- Off White Cover For Large Cord Lock
$6.99
Cover For Large Cord Lock

Part NP07- Cord guide

CODE: 221

$1.99
cord guide

Part NP08- Graber Cord Lock (light tan color only)

CODE: 65

$9.99
Graber cord lock ( light tan only). Pleated shade uses 0.9mm and cellular shade uses 1.0mm. This lock is used for the right or left side.

Part NP08a -New style guide(you must drill out grommet to fit)

CODE: 313

$1.99
Cord guide for Bali/Graber top/down- bottom/up shade. The clear plastic part is no longer made. You will receive the new version. You must drill out grommet...

Part NP10A- Cord Guide 1 3/4" Wide

CODE: 214

$0.99
Cord guide 1 3/4" wide

Part NP12A- Cord Guide 7/8" Wide

CODE: 213

$0.99
cord guide

Part NP15- Right Side Pleated Shade Cellular Cord Lock

CODE: 72

$1.50
Fits headrail size 1" uses 0.9mm cord

Part NP16- Tape Only - $.50 Per Foot

CODE: 73

$0.50
Tape only used for cord loop systems

Part NP16A- Plug For Easy Rise Tape

CODE: 216

$0.99
Bottom rail plug for tape

Part NP16B- Cord Clutch Is Replaced With Part NP16C

CODE: 204

Out-of-stock
[Contact us for a price]
Oder part NP16C for new style cord clutch

Part NP16C- Cord Clutch for Easyrise

CODE: 234

$29.99
Cord clutch for Hunter Douglas and other brands

Part NP16D Spool

CODE: 395

$14.99
spool

Part NP17- Pleated Cellular Shade Cord Lock - Off White

CODE: 74

$24.99
Cord lock uses 0.9mm cord

Part NP21- Cord Clutch

CODE: 78

$19.99
Good for shades up to 9 feet tall. Fits headrail size 1 x 1" Cord clutch for Hunter Douglas and other brands. Uses 2.7mm loop.

Part NP22- Cord Clutch For 1 1/2 inch Headrail

CODE: 79

$19.95
Good for shades up to 9 feet tall. Uses 2.7mm loop. Cord clutch for Graber and other brands

Part NP27- Left Side Cord Lock

CODE: 84

$9.99
Left side cord lock, uses 1.0mm pleated shade cord.

Part NP28- Right Side Cord Lock

CODE: 85

$9.99
Right side cord lock, uses 1.0mm pleated shade cord.

Part NP34- Left Side Pleated Shade Cord Lock

CODE: 81

Out-of-stock
$29.99
Left side cord lock. Uses 0.9mm cord.

Part NP35- Pleated Shade Cord Lock Right Side

CODE: 125

$29.99
Right side cord lock. Uses 0.9mm cord.

Part NP36A Clear Plastic Plug

CODE: 308

$0.99
bottom rail plug for 0.9mm cord

Part NP37- Motor For Cordless Shade Black(no returns)

CODE: 127

$24.99
It's best to replace all the motors and the trans. Lower the shade down. Remove trans with the motor. If only removing some parts, lower the shade down.... More

Part NP37A- Motor Lock

CODE: 371

$2.99
Pleated Shade Parts

Part NP38- Gray Motor For Cordless Blind(no returns)

CODE: 128

$24.99
It's best to replace all the motors and the trans. Lower the shade down. Remove trans with the motor. If only removing some parts, lower the shade down. Remove trans with the motor. Be sure the motor is locked, so not to lose the tension. Replace damaged parts and reinstall. Remove the lock from the motor and remove the pins from the trans and and the shade should work. If you can not lower the shade. Remove the trans and motor untwist the cords. Replace damaged parts. When replacing all the parts the shade needs to be lowered. Attach trans to motor or motors. Install the unit, then remove the locks on the trans or motors.

Part NP39- Tan Motor For Cordless Blind(no returns)

CODE: 129

$24.99
It's best to replace all the motors and the trans. Lower the shade down. Remove trans with the motor. If only removing some parts, lower the shade down. Remove trans with the motor. Be sure the motor is locked, so not to lose the tension. Replace damaged parts and reinstall. Remove the lock from the motor and remove the pins from the trans and and the shade should work. If you can not lower the shade. Remove the trans and motor untwist the cords. Replace damaged parts. When replacing all the parts the shade needs to be lowered. Attach trans to motor or motors. Install the unit, then remove the locks on the trans or motors.

Part NP39A stopper

CODE: 166

$9.99

Part NP41a Black Trans(no returns)Fits D Shape Rod Only

CODE: 300

Out-of-stock
$29.99
It's best to replace all the motors and the trans. Lower the shade down. Remove trans with the motor. If only removing some parts, lower the shade down. Remove trans with the motor. Be sure the motor is locked, so not to lose the tension. Replace damaged parts and reinstall. Remove the lock from the motor and remove the pins from the trans and and the shade should work. If you can not lower the shade. Remove the trans and motor untwist the cords. Replace damaged parts. When replacing all the parts the shade needs to be lowered. Attach trans to motor or motors. Install the unit, then remove the locks on the trans or motors.

Part NP41b Red Trans(no returns)Fits D Shape Rod Only

CODE: 301

$29.99
It's best to replace all the motors and the trans. Lower the shade down. Remove trans with the motor. If only removing some parts, lower the shade down. Remove trans with the motor. Be sure the motor is locked, so not to lose the tension. Replace damaged parts and reinstall. Remove the lock from the motor and remove the pins from the trans and and the shade should work. If you can not lower the shade. Remove the trans and motor untwist the cords. Replace damaged parts. When replacing all the parts the shade needs to be lowered. Attach trans to motor or motors. Install the unit, then remove the locks on the trans or motors.


Part NP43- Gear Assist

CODE: 152

$19.99
Gear assist

Part NP44- Shaft And Connector For Ultraglide Shade

CODE: 153

$4.99
Shaft and connector

Part NP45- Left Side Control For Large Ultraglide

CODE: 154

$59.99
This control will fit a headrail size 3 1/16" from front to back.

Part NP46- Right Side Control For Large Ultraglide

CODE: 155

$59.99
This control will fit a headrail size 3 1/16" from front to back

Part NP47- Medium left side control for Ulraglide shade

CODE: 156

$59.99
This control will fit a headrail size 2 1/8" from front to back

Part NP48- Medium Right Side Control For Ultraglide

CODE: 157

$59.99
This control will fit a headrail size 2 1/8" from front to back

Part NP49- Small Left Side Control For Ultraglide

CODE: 158

$59.99
This control will fit a headrail size 1 3/8" from front to back

Part NP50- Small Right Side Control For Ultraglide

CODE: 159

$59.99
This control will fit a headrail size 1 3/8" from front to back

Part NP51 Cord Clutch With Gear Box( no return if you brake cove

CODE: 236

$69.99
end control with gear box (no returns if you brake cover)

Part NP52 Cord Clutch (no returns if you brake cap)

CODE: 235

$49.99
cord clutch for shade

Part NP68 Left Side Body

CODE: 340

$24.99
Left side body. Right side body. Fits in a 1 1/4" rail. For lock only order part NP70

Part NP68A Right Side Body

CODE: 383

$24.99
Right side body. Fits in a 1 1/4" rail. For lock only order part NP70

Part NP69 Left Side Body

CODE: 341

$29.99

Part NP69A Right Side Body

CODE: 384

$29.99
Right side body. Fits in a 2" rail. For lock only order part NP70

Part NP70 lock only for part NP68-69

CODE: 342

$9.99
lock only for part NP68-69

Part NP71 Off White Cord Clutch Left Side Cover

CODE: 343

$9.99
Off white cover.

Part NP71A-Left Side Cord Clutch
$59.00
Left side clutch


Part NP72B-Right Side Cord Clutch
$59.00
Right Side Cord Clutch

Part NP72C-Off White Left Side End Cap
$14.99
2 3/16" wide 1 1/2" tall.

Part NP72D-Off White Right Side End Cap
$14.99
2 3/16" wide 1 1/2" tall.

Part NP72E Plastic Threaded Rod 4 1/2" Long
$9.99
Graber Blind Parts

Part NP75 White Motor (no returns)
$24.99
I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repairing one shade. No returns or refunds on all cordless shade parts. The blind must be stacked up, before putting in the new motor. You will see an arrow on the motor, turn it 1 full turns. I use an allen wrench for the this. Ad a pin in the top hole to lock it in place. I use a paper clip. Install motor and remove pin. The blind should work. I only have these basic instructions. I am still learning cordless shades myself.

Part NP76 Grey Motor (no returns)
$24.99
I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repairing one shade. No returns or refunds on all cordless shade parts. The blind must be stacked up, before putting in the new motor. You will see an arrow on the motor, turn it 1 full turns. I use an allen wrench for the this. Ad a pin in the top hole to lock it in place. I use a paper clip. Install motor and remove pin. The blind should work. I only have these basic instructions. I am still learning cordless shades myself.

Part NP77 Blue Motor (no returns)
$24.99
I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repairing one shade. No returns or refunds on all cordless shade parts. The blind must be stacked up, before putting in the new motor. You will see an arrow on the motor, turn it 1 full turns. I use an allen wrench for the this. Ad a pin in the top hole to lock it in place. I use a paper clip. Install motor and remove pin. The blind should work. I only have these basic instructions. I am still learning cordless shades myself.

YNP01A Right Side Cord lock (White Only)

CODE: 265

$19.99
This cord lock measures 2" from front to back. Be sure to measure your lock, other locks measure 2 5/16"

YNP01B Left Side Cord lock (White only)

CODE: 305

$19.99
This cord lock measures 2" from front to back. Be sure to measure your lock, other locks measure 2 5/16"

YNP01D-Right Side-No color choice, I will ship what I have.

CODE: 82

$49.99
(No choice in color) I will ship out what I have in stock. Pleated shade cord lock uses 0.9mm cord.

YNP01E-Left Side-No color choice, I will ship what I have.

CODE: 83

$49.99
(No choice in color) I will ship out what I have in stock. Pleated shade cord lock uses 0.9mm cord.

YP01-(Barrel only) This Will Not Fit Delmar Lock

CODE: 59

$9.95
Barrel only, this part uses 0.9mm cord. Part will not fit Del Mar cord lock.